Program Car Keys Citroen

CITROEN REMOTE CONTROL KEY PROGRAMMING INDEX : 

Citroen - Xsara Xantia Synergie Evasion Key Remote Control Programming

CITROEN XSARA-XANTIA-SYNERGIE EVASION - Remote Key Programming

CENTRAL DOOR LOCK (1 BUTTON PLIP KEY)

1. Ensure all doors are unlocked using the key.

2. Press and hold the plip key button until the LED stops flashing.

3. After releasing the button, the LED will light constantly.

4. Press the Plip Button once, and the LED will extinguish.

5. Open the door and hold the Plip key near the Ignition switch, and press the plip button once.

6. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.

7. After 5 seconds the Plip should now operate.

CENTRAL DOOR LOCK with DEADLOCKING (2 BUTTON PLIP KEY)

1. Ensure all the doors are unlocked using the key.

2. Press and HOLD the large plip key button while the LED flashes continuously for 20 seconds. After 20 seconds press the small deadlock button once while still holding the large button.

3. The LED will stop flashing.

4. Release the large button and the LED will light constantly.

5. Press the large button one time, and the LED will go out.

6. Open the door and hold the Plip key near the Ignition switch, and press the large plip button one time.

7. Now turn the ignition ON, and wait 10 seconds then turn ignition OFF.

8. After 5 seconds the Plip should now operate.

Citroen Berlingo Key Remote Control Programming

CITROEN BERLINGO-98 > - Remote Key Programming

1. Turn the Ignition switch to accessory position using the key, without the remote plip attached.

2. Hold the Plip key towards the receiver at the front of the vehicle.

3. Press the large plip button, then the small plip button on the remote.

4. Repeat for second Plip key if required.

5. Turn the ignition OFF.

6. After 5 seconds the Plip should now operate.

Citroen Saxo Key Remote Control Programming

CITROEN SAXO 99 > - Remote Key Programming

1. Unlock the vehicle using the Key.

2. Press the LOCK button 2 times within 20 seconds of unlocking the vehicle

Citroen Xsara Picasso Key Remote Control Programming.

CITROEN XSARA PICASSO - Remote Key Programming

1. Turn the Ignition ON.

2. Press and HOLD the LOCK button for 5 seconds.

3. Turn the Ignition OFF.

4. After 5 seconds test the Plip key.

Citroen Dispatch Key Remote Control Programming.

CITROEN DISPATCH - Remote Key Programming

1. Turn the Ignition ON, and wait for LED to go out.(If fitted)

2. Press the LOCK or UNLOCK button with 20 seconds.

3. Press the LOCK or UNLOCK on other PLIPS within 10 seconds.

4. LED should light for 1 second.

5. Check PLIPS for operation.