This article show a guide on how to use Nissan Consult 3 Plus to program Keyless remote (T31/C11/K12).Hope it helps.
How To ?
Procedures :
1 - From the Consult -III plus "All Dtc" Screen, Select the 'BCM'
2 - Select "Multi Remote Entry"
3 - Select "Work Support"
4 - When the next screen appears ,(section shown below)select "REMO CONT ID REGIST"function to program the remotes .
ID Code Entery Procedure
STEP 1
Close all doors (Observe the operation of the interior light with each door to ensure the door switches are OK).
STEP 2
Operate lock using the drive side door lock and unlock switch (on P/Window swassy)
STEP 3
1. Remove and insert the key into ingnition key 6 times within 10 seconds (turning the key barrel switch from OFF to ON counts as1 time)
2. Hazard warning lamp blinks and all door unlocks.
Note : On the sixth key insertion ,keep the key in the cylinder with the key barrel switch ON .Does the hazard lamp blink and doors unlock ? Yes >> Go To Step 4.ON >>GoTo Step 1.
STEP 4
Within 3 seconds after the hazard lamp blinks and all door unlocks ,turn ignition switch to the ACC position and operate lock using the driver side door lock and unlock switch.
STEP 5
Yes -1>>When adding a keyfob :Go To Step 6.
Yes 2->>When ending registration :GO To Step 8
No >>Go To Step 1.
STEP 6
Operate lock using the driver side door lock and unlock switch.
STEP 7
Yes -1>>When adding a keyfob :Go To Step 6.
Yes 2->>When ending registration :GO To Step 8
No >>Go To Step 6.
Open the doors >> REGISTRATION END.
Nissan consult 3+ plus V83.11.00:
https://mega.nz/#!D9ZRnaSL!Y6rksoTqF1rbpx2-tIvliYFN5RcQSb6s-WwKqBGByZI
Nissan Consult 3+ plus V83.11.00:
https://mega.nz/#!ukhgRSYJ!DXM22QAbQDo-b4Di9e6tyxy2SE4fKVogLmKCv6QzZUA
How to install Nissan consult 3+ (Video):
How To ?
Procedures :
1 - From the Consult -III plus "All Dtc" Screen, Select the 'BCM'
2 - Select "Multi Remote Entry"
3 - Select "Work Support"
4 - When the next screen appears ,(section shown below)select "REMO CONT ID REGIST"function to program the remotes .
ID Code Entery Procedure
STEP 1
Close all doors (Observe the operation of the interior light with each door to ensure the door switches are OK).
STEP 2
Operate lock using the drive side door lock and unlock switch (on P/Window swassy)
STEP 3
1. Remove and insert the key into ingnition key 6 times within 10 seconds (turning the key barrel switch from OFF to ON counts as1 time)
2. Hazard warning lamp blinks and all door unlocks.
Note : On the sixth key insertion ,keep the key in the cylinder with the key barrel switch ON .Does the hazard lamp blink and doors unlock ? Yes >> Go To Step 4.ON >>GoTo Step 1.
STEP 4
Within 3 seconds after the hazard lamp blinks and all door unlocks ,turn ignition switch to the ACC position and operate lock using the driver side door lock and unlock switch.
STEP 5
- Press the lock or unlock button of the keyfobo be added .
- All doors unlock simultaneously.
- Hazard warning lamp blinks and all door unlocks.
- Key ID is registerd
Yes -1>>When adding a keyfob :Go To Step 6.
Yes 2->>When ending registration :GO To Step 8
No >>Go To Step 1.
STEP 6
Operate lock using the driver side door lock and unlock switch.
STEP 7
- Press the lock or unlock button of the keyfobo be added .
- All doors unlock simultaneously.
- Hazard warning lamp blinks and all door unlocks.
- Key ID is registerd
Yes -1>>When adding a keyfob :Go To Step 6.
Yes 2->>When ending registration :GO To Step 8
No >>Go To Step 6.
Open the doors >> REGISTRATION END.
Nissan Consult 3 Plus Free Download:
Nissan consult 3+ plus V83.11.00:
https://mega.nz/#!D9ZRnaSL!Y6rksoTqF1rbpx2-tIvliYFN5RcQSb6s-WwKqBGByZI
Nissan Consult 3+ plus V83.11.00:
https://mega.nz/#!ukhgRSYJ!DXM22QAbQDo-b4Di9e6tyxy2SE4fKVogLmKCv6QzZUA
How to install Nissan consult 3+ (Video):
No comments:
Post a Comment