ADD KEY FOR PASSAT VDO NEC+24C64 DASH by OBD.

Here is the guide to use Xhorse VVDI VAG key programmer to add key passat 2013 with VDO NEC+24C64 dashboard by OBD.

VVDI2 adds passat 2013 key key guide:
Go to VVDI2 software --->select VW car brand.

Select key learn ---> 4th immobilize system-VW/skoda/seat -->Auto detect type VVDI2 read VIN ECU and dash type :NEC +24C64.

Click on Diagnosis
Click on read Eeprom/Flash
Select Read eeprom.click on Next

Turn ignition to On position (if it is smart key . turn ignition Off then turn it On).
Dash instrument screen is in black,it is normal.

 

Follow VVDI2 key programmer prompts :

     1- Dashboard is in black, complete following steps to activate the dash.

     2-Read and save eeprom data.

     3-Read and save IMMO data .

     4-Generate a dealer key (if has working key and does not to add key ,skip to step 7)

     5-Reset dash

     6-Key learning from immo data

     7-Other functions.

Reading eeprom data 

and save eeprom data 

Read Immobilizer data 

and save immo data 

click on Generate dealer key

Choose car manufacture ---> VW

select prepare normal dealer key

Insert car key into VVDI2 VW 

all preclude done  .

Reset  dash.

Reset success , dash activeted.

Select add key.

Make sure you have  backup both data eeprom and immo data .

Select 2nd option to do key learning and enter key numbers to learned.

Click on next 

Turn ignition On position (if is smart key turn ignition off then ON )

Confirm if it is smart key.

insert second key within 5 sseconds ,turn ignition On for  2 seconds  , dash displayed 2-2 
Key learning success.

Statrt he engine with new key.

DOOONE!