Program Car Keys > Fiat

FIAT KEY REMOTE PROGRAMMING & SYNCHRONISING

 

Fiat Seicento Remote Key Programming :

Fiat Seicento

1. You will need the 4 digit security code for the vehicle (normally supplied on a card when new)

2. Locate the button in the interior light assembly, next to an LED and near the ultrasonic part of the alarm. Press the button for about a second and the LED will flash.

3. Release the button

4. After approx 5 seconds the LED will flash once

5. Enter the first digit of the security code by pressing the button the required number of times.

6. Now wait for about 5 seconds and the LED will flash once. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.

7. If all the numbers are entered correctly the LED will flash for 10 seconds. Whilst the LED is flashing, press and hold the button. The LED will continue to flash until you press a button of a remote- it will then remain on.

8. Release button of remote and the one in the interior light.

9. Repeat for subsequent remotes.

Fiat Cinquecento Remote Key Programming Instructions :

Fiat Cinquecento

1. You will need the 4 digit security code for the vehicle (normally supplied on a card when new)

2. Press the button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics) for about a second and the LED will flash.

3. Release the button

4. After approx 5 seconds the LED will flash once

5. Enter the first digit of the security code by pressing the button the required number of times.

6. Wait for about 5 seconds and the LED will flash once

7. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.

8. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the button near the interior light (used above)

9. The LED will continue to flash until you press a button of a remote- it will then remain on.

10. Release button of remote and the one in the interior light.

Fiat Bravo/Brava Remote Key Programming Instructions :

Fiat Bravo/Brava

1. You will need the 4 digit security code for the vehicle (normally supplied on a card when new)

2. Press the button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics) for about a second and the LED will flash.

3. Release the button

4. After approx 5 seconds the LED will flash once

5. Enter the first digit of the security code by pressing the button the required number of times. Wait for about 5 seconds and the LED will flash once

6. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.

7. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the right hand button near the interior light (used above)

8. The LED will continue to flash until you press a button of a remote- it will then remain on.

9. Release button of remote and the one in the interior light.

Fiat Coupe Remote Key Programming Instructions

Fiat Coupe

1. You will need the 4 digit security code for the vehicle (normally supplied on a card when new)

2. Press button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics) for about a second and the LED will flash.

3. Release the button

4. After approx 5 seconds the LED will flash once

5. Enter the first digit of the security code by pressing the button the required number of times.

6. Wait for about 5 seconds and the LED will flash once

7. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.

8. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the right hand button near the interior light (used above)

9. The LED will continue to flash until you press a button of a remote- it will then remain on.

10. Release button of remote and the one in the interior light.

Fiat Barchetta Remote Key Programming Instructions:

Fiat Barchetta

1. You will need the 4 digit security code for the vehicle (normally supplied on a card when new)

2. Press button (in the interior light assembly there is a button and an LED next to the alarm ultrasonics) for about a second and the LED will flash.

3. Release the button

4. After approx 5 seconds the LED will flash once

5. Enter the first digit of the security code by pressing the button the required number of times.

6. Wait for about 5 seconds and the LED will flash once

7. Enter the second digit of the security code as above- if one of the digits is a zero, do not press the button at all and wait for the single flash requesting the next digit.

8. If all the numbers are entered correctly the LED will flash for 10 seconds whilst the LED is flashing, press and hold the right hand button near the interior light (used above)

9. The LED will continue to flash until you press a button of a remote- it will then remain on.

10. Release button of remote and the one in the interior light.

Fiat Ulysse Remote Key Programming Instructions

Fiat Ulysse

New remotes cannot be programmed without the use of special hardware but existing remotes can be synchronised as follows:

1. Switch on the ignition

2. Press the lock or unlock button and hold for 10 seconds. Do this on all remotes to synchronise them.

Fiat Scudo Remote Key Programming Instructions

Fiat Scudo

New remotes cannot be programmed without the use of special hardware but existing remotes can be synchronised as follows:

1. Switch on the ignition

2. Wait for the system LED to extinguish

3. Press the lock or unlock button and hold for 10 seconds, do this on all remotes to synchronise them.