Opel DPF Forced Regeneration Manually By OPCOM VAXU -COM

Here Santidiag share with you guide on how to use OPCOM to forced DPF Regeneration  for opel  vehicles.

You can start the forced regeneration on the following models:

Astra-H

• Z19DT, Z19DTH, Z19DTL, Z17DTR, Z17DTJ
  Zafira-B
• Z19DT, Z19DTH, Z19DTL, Z17DTR, Z17DTJ
  Vectra-C / Signum
• Z19DT, Z19DTH, Z19DTL
  Corsa-D

• Z13DTH, Z17DTR

Antara

• 2.0L Diesel engine Warning

Warning !

The exhaust gas temperature will increase to over 600 °C, so you must perform this outside,
on a non-flammable ground.
The regeneration procedure is completely controlled by the engine control unit.
Prerequisites

• Engine is running at idle
• Engine is fully warmed up
• To avoid consequential damages, the DPF regeneration must be executed only once!

EDC16 System

Note, after "DPF Regeneration" is finished live data "Diesel Particulate Filter
Saturation" will show 70%. When engine controller has performed a dynamic

regeneration value will be changed.
DECE01 System.